RAMPS 1.4 BOM PDF Print Email
Written by Steve Hildinger   
Tuesday, 24 April 2012 03:06

RAMPS 1.4 Assembly tutorials (coming soon)

  1. Preparation and Surface Mount Resistors
  2. Surface Mount Capacitors
  3. Female and Male Top Header Pins
  4. Diodes, Fuses, Mosfets, and Power Terminals
  5. Bottom Header Pins and Switch

RAMPS 1.4 BOM

Surface Mount Resistors

  • 3x 10 Ohm Resistor, 0805 size (R13, R14, R15)
  • 1x 1K Ohm Resistor, 0805 size (R12)
  • 3x 1.8K Ohm Resistor, 0805 size (R23, R24, R25)
  • 5x 4.7k Ohm Resistor, 0805 size (R1, R7, R11, R21, R22)
  • 5x 10K Ohm Resistor, 0805 size (R16, R17, R18, R19, R20)
  • 8x 100K Ohm Resistor, 0805 size (R2, R3, R4, R5, R6, R8, R9, R10)

Surface Mount Capacitors

  • 1x 100nF Capacitor, 0805 size (C2)
  • 3x 10uF SMD Capacitor (C1, C5, C8)
  • 6x 100uF SMD Capacitor (C3, C4, C6, C7, C9, C10)

Surface Mount LEDs

  • 1x Green LED, 0805 size (LED1)
  • 3x Red LED, 0805 size(LED2, LED3, LED4)

Male Pin Headers

  • 2x 1x6 Male Pin Headers
  • 6x 1x4 Male Pin Headers
  • 5x 1x8 Male Pin Headers
  • 8x 2x3 Male Pin Headers
  • 1x 2x18 Male Pin Headers

Female Pin Headers

  • 2x 1x16 Female Pin Headers
  • 6x 1x8 Female Pin Headers

Diodes

  • 2x 1N4004 Diodes

Fuses

  • 1x MF-R500 Resettable Fuse
  • 1x MF-R1100 Resettable Fuse

Mosfets

  • 3x STP55NF06L Mosfets

Power

  • 1x 4-pin Power Terminal
  • 2x 3-position Screw Terminals

Reset Switch

  • 1x Push Button Switch, B3F-3100

Jumpers

  • 15x Jumpers

Arduino

  • 1x Arduino Mega 2560 R3
Last Updated on Thursday, 26 April 2012 05:13