The cause of the failure of the submersible pump not pumping water
  • Page:
  • 1

The cause of the failure of the submersible pump not pumping water
Facebook Twitter Delicious Digg FriendFeed Linkedin Reddit Stumbleupon MySpace Technorati Blogger Wordpress

The cause of the failure of the submersible pump not pumping water 1 week, 3 days ago #1

     The submersible pump's seal is too tight for the packing, the cooling water cannot enter the packing, or the shaft surface is damaged. Some measures can be taken, such as properly relaxing the packing and cleaning the sealing tube. Packing wear must be replaced. Pre-installed in the place where the oil is immersed, and then turn into the incision to be staggered to reduce water leakage.



1. Submersible pump vibrates


     It may be that the electric rotor is unbalanced, or the coupling is not well combined, the bearing is worn and bent, or the rotating parts are loose and broken, or the pipe bracket is not firm, etc., which can be individually adjusted, repaired, reinforced, and replaced.
read more:

Drop in Nash liquid ring vacuum pump to condenser air removal
Idb Clean Water Pump Single Phase
vacuum bag urinal upvc valve vacuum air control valve
Diaphragm Vacuum Pump Manufacturers Syria
  • Page:
  • 1
Time to create page: 0.12 seconds