For this part you will need:

• 1x USB Cable
• 1x 12V 20A Power Supply
• ~2.5 feet of spiral cable management

In this part you will put the electronics onto the machine and plug in all the wires from the last step.  In order to do this step you need to have a set of RAMPS 1.4 (or similar) electronics all put together and ready to put on the machine.  You will also need to have the power supply ready to be plugged into the wall and the RAMPS shield.  You will need the 1.5mm allen wrench again as well as something to clip the extra part of the zip ties off.

 You will want to start by putting the RAMPS electronics onto the ramps-holder printed piece.